Call for price
The WX-9000 High-Speed Wide-Band Data Recorder from TEAC – This new and enhanced data recorder builds on the performance of it’s predecessor, the WX-7000, with improved functionality and ease of use.
Supports 256kHz sampling (100kHz band) and 64ch (16bit) recording. Up to 128 channels can be recorded at 102.4 kHz (40 kHz band).
Achieves high dynamic range of 137dBtyp based on FFT.
Recording, playback, settings, and operation in one unit. Easier to use with a waveform display on the main unit’s LCD screen and a touch panel. Operation with the jog dial and buttons is still possible as before.
The connection between the main unit and the extension, as well as between extensions (for standalone recording), can be extended up to a maximum of 50 meters with an optional cable connection. Sampling maybe subject to restrictions.
Isolating every 2 channels makes it less susceptible to noise and interference from other channels.
Number of channels can be increased by 16, up to a maximum of 128 without the need for cables. The main unit and expansion I/O units can be connected simply by stacking them together.
Built-in GPS input (GPS receiver is optional).
Time and location information can be acquired.
Automatic recording and standby mode for recording can be set at power-on.
In the event of an unexpected power outage, it is also possible to enable automatic recording after power recovery.
The recording media is freely available and inexpensive 2.5-inch SATA SSD (up to 4TB), which also ensures vibration resistance.
A dedicated cartridge is used, and the cartridge can be used as is as removable media.
*The SD card cartridge can only be used in the WX-9000.
Redesigned and easier to use, the Navi Software allows configuring the main unit, setting measurement conditions, displaying recorded data, etc. from a PC. Displays waveforms, bar meters and FFT.
WX-9000 Series Main Specifications |
|
| Power Supply | AC 100V to 240V DC 8V to 36V |
Input |
|
| Number of Channels | 128ch max. |
| Connector | BNC |
| Signal Type | Voltage (AC/DC) IEPE (TEDS Supported) |
| Range | 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50V |
| Resolution | 24bit /16bit |
| Isolation Between Channels | Isolated every 2ch |
| MIC Set | FLAT / A / C |
| HPF | 10Hz / 20Hz |
| Dynamic Range | 137dB (FFT-based) |
| Max. Recording Rate | 32.768MB/s 16bit: 256kHz x 64ch 24bit: 256kHz x 32ch |
Output |
|
| Range | ±5V |
| Connector | BNC |
Synchronized Operation |
|
| WX-9000 Synchronization | Up to 2 units (max. 256ch) |
GPS Input |
|
| Number of Input Channels | 1 |
| Connector | DX10A-20S (50) |
| Supported GPS Receiver | TZ-gr8015R |
Voice Memo |
|
| Sampling Frequency | 8kHz |
| Resolution | 8bit |
| File Format | WAV |
Operating Conditions |
|
| Operating Temperature / Humidity | 0 to 40°C / 10 to 80% (no condensation) |
| Storage Temperature / Humidity | -20 to 60°C / 5 to 90% (non-condensing) |
| Operating Air Pressure Range | 860 to 1060hPa |
| Vibration Resistance | MIL-STD-810H Figure 514.8C-2 |
| Communication Interface | Gigabit Ethernet |
| Recording Media | 2.5-Inch SATA SSD |
Accessories and Optional Extras |
|
| Accessories Included | AC Adapter*, SSD Cartridge (SSD NOT INCLUDED), Earphone, Microphone |
| Optional Extras | Cable Connection Adapter, Connection Cable between Units, SD Card Cartridge, Side Frame, Remote Control, GPS Receiver |
* The number of AC adapters included varies depending on the number of channels configured.
DAQLOG Systems Ltd
Brixham Laboratory
Freshwater Quarry, Brixham, TQ5 8BA
Tel: 01803 611 854
