TD-700T is a digital indicator to measure and display physical quantity such as load, pressure, and torque working with strain gauge transducers.
Call for price
TD-700T is a digital indicator to measure and display physical quantity such as load, pressure, and torque working with strain gauge transducers. Colour graphic LCD display, high-speed sampling, TEDS function (IEEE1451.4 class 2 mix mode interface compliance) and various hold function, the various functions are condensed in a DIN half-size body.
Switchable between the 5-digit digital display that enables direct reading of physical quantities up to ±99999 and the bar meter display that shows an analogue representation of the indicator value.
TD-700T can sample, hold and average both positive and negative values. It can be used in measurements using dual pole devices such as torque sensors.
Allows the measurement of static strain. This function makes it easier to check load-cells for deterioration and plastic deformation.
It is possible to set up to 4 values (HHI, HI, LO and LLO) to compare with the input signal. The definition of those values is changeable (e.g. 3 upper limits and 1 lower limit). This provides users with a wide variety of applications, and would help avoid damages and/or problems on your products.
TD-700T can also be used as a signal conditioner.
The TD-700T optionally supports CC-Link and RS-485 interfaces
| Bridge Voltage | DC, 2.5/10V, ±10% (30mA current maximum, remote sense can be used) | |
| Signal Input Range | ± 3.2 mV/V | |
| Equivalent Input / TEDS | Calibration Range | 0.3 mV/V–3.2 mV/V |
| Calibration Accuracy | Within 0.1% F.S. (when using a 1m standard TEAC Φ8, 4-core shielded cable with 350Ω impedance, 10V BV and 0.5mV/V or greater setting) | |
| Accuracy | Linearity | Within 0.01% F.S. + 1 digit (when input is 1 mV/V or greater) |
| Zero Drift | Within 0.5 μV/°C (input conversion value) | |
| Gain Drift | Within ±0.005% F.S./°C | |
| A/D Conversion | 24-bit, 4000 times per second, 20000 times per second (fast sampling mode) | |
| Digital Filter | Select 3 Hz (−6dB/oct), 10, 30, 100, 300, 1000 Hz (−12dB/oct) or none | |
| D/A Output** | 4000 times per second, isolated output, ±1–±10V voltage output (set in 1V steps) and about 1/59000 resolution (when set to ±10V), or 4–20mA current output and about 1/43000 resolution | |
| TEDS Function | IEEE1451.4 class 2 mix mode interface | |
| Display | 320 x 240 colour liquid crystal | |
| Indicator Value | Display Range | −99999 to 99999 |
| Decimal Point | Display position selectable | |
| Times Displayed | Select 4, 6, 10 or 20 times/second | |
| Settings | Calibration Settings | Zero calibration/span calibration (TEDS calibration, actual load calibration, equivalent input calibration) |
| Functions | High limit, low limit, high high limit, low low limit, comparison mode, hysteresis, nearly zero, moving average, low pass filter, motion detect, zero tracking, static strain, digital zero, digital zero offset, zone definition, hold mode, key lock, minimum grid, display times, bridge voltage, digital zero limit, clear digital zero, comp. output pattern, comparison output control, select data output, D/A converter, remote sense | |
| Hold Function | Sample hold, peak hold, bottom hold, peak to peak hold, peak and bottom hold, average hold, zone definition hold (peak, bottom, peak to peak, peak and bottom, average) | |
| External Input and Output Signals | Input | Hold, judge, clear, digital zero, setting memory selection 1, setting memory selection 2 (isolated from main unit circuits using a photocoupler) |
| Output | HH, HI, OK, LO, LL open collector output (isolated from main unit circuits using a photocoupler) | |
| CC-Link* | DA, DB (isolated from main unit circuits using a photocoupler), DG, SLD | |
| RS-485** | A+, B− (isolated from main unit circuits using a photocoupler), TRM, FG | |
| Power Supply | DC Power Supply Specifications | Ratings: DC 12–24 V, 9 W |
| Operating Temperature Range | 0℃ to 40℃ | |
| Storage Temperature Range | –20℃ to 60℃ | |
| Operating Humidity Range | 85% RH or less (without condensation) | |
| Applicable Standards | CE marking EN61326 (class A), UL61010-1 | |
| External Dimensions (w x h x d) | Approximately 96 mm × 53 mm × 132 mm (without protrusions) | |
| Weight | 300g approximately. | |
* CC-Link option only
** RS-485 option only
DAQLOG Systems Ltd
Brixham Laboratory
Freshwater Quarry, Brixham, TQ5 8BA
Tel: 01803 611 854
