TD-260T Digital Indicator

Description

The TEAC TD-260T is a high-performance Digital Transducer Indicator designed for precise force and strain measurements using load cells. It features TEDS (Transducer Electronic Data Sheet) for plug-and-play auto-calibration, various hold functions and connectivity options like BCD and RS-232C outputs. The device is specifically designed for industrial panel mounting with a 1/4 DIN size.

Product Features

5-digit digital display (reading scale -19999 to +99999)
Static strain measurement
Analogue voltage output supported.
Hold Functions: Offers various hold modes including Peak, Bottom, Peak to Peak, and block-specified hold (Peak, Bottom, Peak to Peak).
Data Output Options: Equipped with either BCD (Binary Coded Decimal) output or an RS-232C interface.
Panel Mountable: Designed in a standard 1/4 DIN size for easy integration into manufacturing equipment panels.
TEDS Compliant: Supports IEEE 1451.4 standards, enabling automatic setup and calibration when paired with a TEDS-enabled load cell, which eliminates the need for manual configuration.

Applications:

Quality control
Fabrication
Advanced analysis
General force measurement in industrial settings

Bridge Voltage		10V DC, 2.5V±10% (Current: 60mA max. Remote sensing available)
Signal Input Range		±3.2mV/V
Equivalent input / TEDS	Calibration Range	0.3mV/V to 3.2mV/V
Equivalent input / TEDS	Calibration Accuracy	Within 0.1% FS (at 10V for BV and 0.5mV/V or more for sensor sensitivity)
Zero Adjustment Range		±2.0mV/V
Accuracy	Linearity	Within 0.01% FS + and 1 digit (at an input of 1mV/V or more)
	Zero Drift	0.5µV/°C or less (RTI)
	Gain Drift	Within ±0.005% FS/°C
A/D Conversion Rate		100 times/sec
Analogue Filter		Selectable from 3, 10, 30, 100, 300Hz (-12dB/oct)
Analogue Voltage Output	Voltage	Approx. 2V for 1mV/V
Analogue Voltage Output	Load Register	2kΩ or more
TEDS Function		IEEE1451.4 Class 2 Mixed-mode Interface*
Display	Characters	14.6mm high alphanumeric (shown by 7-segment green LED display)
	Range	-19999 to 99999
	Decimal Point	Position to be selectable
	Refresh Rate	4, 6, 10, 20 times/sec
Display Items	Calibration Setting	Zero CAL/Span CAL (TEDS CAL, Actual load CAL, Equiv. input CAL)
Display Items	Function Settings	HI value, LO value, HH value, LL value, comparison mode, Hysteresis, Near-zero, Digital filter, Analogue filter, Motion detection, Zero tracking, Static strain, Digital zero, Zero offset, Hold mode, Key lock, Minimum scale, Refresh rate, Bridge voltage, B.C.D data refresh rate, RS232C, D/A converter
Hold Functions		Sample hold, Peak hold, Bottom hold, Peak-to-Peak hold, block-specified hold (Peak, Bottom, Peak-to-Peak)
External Input / Output Signals	Input	Hold, Decision, Clear, Digital Zero
External Input / Output Signals	Output	1a contact for each relay: HH, HI, OK, LO, LL, Analogue Voltage
Power Supply	AC Power Rating	100 to 240V ±10% 50/60Hz AC, 13W
Operating Temperature Range		-10°C to 40°C
Storing Temperature Range		-20°C to 60°C
Operating Humidity Range		85% RH or less (no condensation)
Standard	Safety Standard	Installation Class I, EN61010-1 Pollution Degree 2 Overvoltage Category II, CE Marking
Standard	EMC	VCCI (Class A), EN61326 (Class A), EN61000-3-2, EN61000-3-3
External Dimensions (W x H x D)		Approx. 96 x 96 x 146mm (excluding protrusions)
Weight		Approx. 950g