UK Supplier of Data Acquisition & Thermal Imaging systems, software and services
FREE DELIVERY on orders over £275 ex VAT
FREE DELIVERY on orders over £275 ex VAT
Remote Control Module for the RA3100 Data Acquisition System.
Call for price
RA3100 Remote Control Module
TRIG IN/OUT.
For use with a remote control module cable to connect with other devices (available separately).
Remote Control Module RA30-112 Specifications |
|
| Input Connector | Half-pitch 20-pin connector |
| Output Connector | Half-pitch 14-pin connector |
External Input |
|
| Function: Control by external signal. | |
| Control Signal | START/STOP, MARK, FEED, PRINT, TRIG |
| Input Level | High level: 2.1V to 5.0V Low level: 0V to 0.5V (active low) |
| Response Speed | Select from High-speed/Normal/Low-speed |
| Effective Pulse Width | High-speed response: 1μs or higher during high interval, 1μs or higher during low interval Normal response: High interval 1ms or higher, Low interval 1ms or higher Low-speed response: 10ms or higher during high, 10ms or higher during low-speed response |
| Maximum Allowable Input Voltage | 30V |
External Output |
|
| Function: Control signals can be externally output | |
| Control Signal | START/STOP, MARK, FEED, PRINT, TRIG |
| Output Level | High level: 3.8V to 5.0V Low level: 0V to 0.5V (active low) |
| Output Pulse Width | START/STOP, FEED, PRINT: Active output during operation TRIG, MARK: High-speed response: 1 μs Normal response: 1 ms Low-speed response: 10 ms |
External Sampling Input (EXT.SMPL IN) |
|
| Synchronization via external clock signal is possible (simultaneous SSD recording and printer recording are not possible.) | |
| Input Level | High level: 2.1V to 5.0V Low level: 0V to 0.5V |
| Effective Pulse Width | High-speed (SSD Recording): 2μs or higher Low-speed (Printer Recording):1ms or higher |
| Maximum Input Frequency | High-speed (SSD Recording): 250 kHz Low-speed (printer recording): 500Hz |
External Sampling Output (EXT.SMPL OUT) |
|
| Synchronization clock signal can be output externally | |
| Output Level | High level: 3.8V to 5.0V Low level: 0V to 0.5V (active low) |
Reference Clock for Calibration |
|
| Function: Clock output for operation check | |
| Output Level | 0V to 5V (±1%) |
| Output Frequency | 1kHz (±1%) |
| Duty Ratio | 50% (±5%) |
General |
|
| Withstand Voltage | AC300V, 1 minute (between input/output and main chassis) |
| Maximum Rated Voltage to Ground | AC, DC 42V |
| Dimensions | Approx. 140 (input-side W) x 223(D) x 20(H) mm |
| Weight | Approx. 250g |
| Compliance Standards | Safety: IEC61010-1 EMC: IEC61326-1, class A |
