The SS3580-MBTCP converter connects the Modbus RTU devices of a RS-485 network to the Ethernet network through the Modbus TCP protocol. By means of the Telnet interface it is possible to configure all the Modbus TCP side options (IP address, subnet mask, etc…) and the Modbus RTU side options (baud rate, etc…).
The device guarantees a full isolation between lines, allowing for use even in heavy environmental conditions. SS3000 series devices are designed to be easily mounted on DIN rail, optimizing the space encumbrance. Where the thermal dissipation allows it, the devices can be mounted side by side, reducing the amount of space required. The connections are made by means of removable screw terminals, to simplify the handling of the devices.
LED signalling of Ethernet activity and data rx-tx on the serial line allows direct monitoring of the systems functionality. The connection is made by removable screw-terminals (supply and RS-485) and RJ45 plug (Ethernet).
SS3580-MBTCP is in compliance with the 89/336/EEC directive on the electromagnetic compatibility. The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.
- Network interface
- Ethernet 10/100Base-T, Modbus TCP
- Telnet configuration
- RJ45 connection
- RS-485 Serial interface
- Modbus RTU Master
- Baud rate up to 115.2 Kbps
- Distance up to 1200 m, up to 32 devices in multi-point
- Removable screw-terminal connection
- LED signalling for Link/Act Ethernet, serial RX-TX, power supply
- Galvanic Isolation on all ways
- EMC compliance – CE mark
- Suitable for DIN rail mounting in compliance with EN-50022
For more information, please see the Product Specifications Sheet.