True RMS AC Leakage Clamp Meter

Description

True RMS AC Leakage Clamp Meter with Bluetooth interface.

The ideal tool for measuring leakage currents. Measure the leakage currents present on the earth, determine the leakage in a cable by positioning the clamp directly around a cable (without the earth wire), also measure currents up to 60A AC with a resolution of 1µA.

Product Features

LCD 6000 counts with backlight
Current measurement up to 60A AC
Minimum resolution : 1μA
Low pass filter
Maximum Jaw Opening : 42mm
High Frequency Rejection (selectable : 50Hz, 60Hz & 1kHz)
True RMS reading
Manual and Automatic range
Max, Min and HOLD functions
Bluetooth interface to save reading values
Torch light

AC Current
Range	6 mA to 60 A
Accuracy	±(2% + 5dgt)
Resolution	1 µA
Minimal Measured Current	10 µA
Positioning Error	±1% of reading
Bandwidth	15 Hz to 10 kHz
AC Current with Low Pass Filter (50-60Hz)
Range	6 mA to 60 A
Accuracy	±(1% + 5dgt)
Resolution	1 µA
Minimal Measured Current	10 µA
Positioning Error	±1% of reading
Bandwidth	30 Hz to 60 Hz
Cut-off Frequency	200 Hz
AC Current with Low Pass Filter (1kHz)
Range	6 mA to 60 A
Accuracy	±(1% + 5dgt)
Resolution	1 µA
Minimal Measured Current	10 µA
Positioning Error	±1% of reading
Bandwidth	30 Hz to 200 Hz
Cut-off Frequency	1 kHz
Functions	Min, Max and HOLD
General
Display	LCD with backlight
Counts	6000 counts
Overload Display	OL
Max conductor size	40 mm
Measuring Rate	up to 5 measurement per sec
Interface	Bluetooth® (Bluetooth® Low Energy 4.0, Effective range: Open air 10m)
Operating Temperature	-10°C to 50°C
Humidity	between 45% and 80% (check in manual)
Soakage Temperature	-20°C to 60°C (without batteries), HR < 80%
Security	600V - CAT III
Standards	IEC/EN 61010-1, EN 61010-2-032
Battery Type	2 Batteries, IEC LR6, Alkaline (AA) Battery life: Alkaline 60 hours
Auto Power Off	after 20 minutes
Dimensions	100 x 230 x 24 mm
Weight	500g
Supplied with: carrying pouch, manual and batteries