Description
These sensors provide a precise 4-20mA output for measuring gauge pressures from -14.5 to 10000 PSIG and absolute pressures from 15 to 60 PSI absolute.
Constructed from corrosion-resistant 316 stainless steel, these sensors are designed for long-term reliability in harsh environments. Their sealed IP65/IP66 enclosure protects against dust and water ingress, making them suitable for both indoor and outdoor installations.
Select either a 1/8-27 NPT thread (2000361 Series) or 1/4-18 NPT thread (2000500 Series).
DATAQ 4-20mA Output Pressure Sensors are engineered to deliver dependable pressure measurements across a wide range of industrial applications including monitoring oil, fuel, air and water pressure.
Compatible with most standard pressure sensor applications, it also integrates seamlessly with data loggers for reliable data storage.
Product Features
- Measure Gauge Pressure from -14.5 to 10,000 PSIG
- Measure Absolute Pressure from 15 to 60 PSIA
- ±0.5% accuracy
- Linear 4-20mA analogue output
- 8-30V supply voltage
- Rugged 316 stainless steel construction
- Suitable for oil, fuel, water, and air pressure
- Includes mating connector and 3 ft wire harness
- Select from 1/8-27 NPT or 1/4-18 NPT thread connections
- IP65/IP66 environmental protection
- RoHS and RoHS3 compliant
- Custom pressure ranges and connection options available
Accessories
 |
4-20mA Current Loop Shunt Resistor
250 Ω ±0.1% Precision, Metal Film, 1/2W, Axial Resistor
Exceptionally low noise; typically 0.10 μV/V
Low voltage coefficient to ±5 ppm/V
Flame retardant coating. RoHS compliant.
Product Page |
 |
Stainless Steel Reducer Hex Bushing
To convert pressure transducer fitting from 1/8 NPT to 1/4 MNPT
Max operating pressure: 2000 PSI
Product Page
|
 |
3-Foot Pressure Transducer Cable
Spare 3-foot long wire harness (pigtail) with mating connector
and seal for 2000361 and 2000500 family pressure sensors
Product Page
|
 |
10-Foot Pressure Transducer Cable
10-foot long wire harness (pigtail) with mating connector
and seal for 2000361 and 2000500 family pressure sensors
Product Page
|
 |
4-20mA Signal Splitter. 1 Input, 4 Output
Signal splitter for 4-20 mA Sensors, 1 Input, 4 Out.
Isolated Signals.
0-300Hz Frequency Range.
Transmitting Accuracy ±0.1%FS
Product Page
|
 |
24V AC/DC DIN-Rail Power Supply
100-240V AC Input to 24V DC Output DIN Rail Power
Supply for 4-20mA Sensors.
35mm DIN Rail.
|
4-20mA Pressure Transducers
|
| Pressure Type |
Gauge pressure available for -14.5 to 10000 PSIG
Absolute pressure available for 15 to 60 PSIA |
| Measurement Range |
-14.5 PSI to 10,000 PSI |
| Process Media |
Air, Water, Oil Fuel
(Customisation Options Available) |
| Material |
316 stainless steel and high temperature auto-grade plastic |
| Type of Sensor |
Oil-filled diffused silicon piezoresistive |
| Thread |
1/8-27 NPT or 1/4-18 NPT thread |
Electrical
|
| Output |
4-20mA linear output |
| Supply Voltage |
8-30V |
| Max Power |
25mA |
| Protection Class |
Typical IP65-66, depending on electric connection |
Accuracy & Performance
|
| Accuracy |
±0.5%FS 15 to 25°C
±1%FS -20 to 70°C
* Ranges lower than +5 PSI has 0.5 - 1% accuracy at room temperature |
| Burst Pressure |
For transducers of full range up to 1450 PSI, 4 times span
For transducers of full range 1500 to 10000 PSI, 17400 PSI |
| Overload Pressure |
For transducers of full range up to 1450 PSI, 2.5 times span
For transducers of full range 1500 to 10000 PSI, 14500 PSI |
| Long-term Stability |
±0.5%FS/year |
| Compensation Temperature |
-10°C to 70°C |
| Ambient Temperature |
-20°C to 85°C |
| Temperature Effect on Zero |
Typical: ±0.02%FS/°C
Maximum: ±0.05%FS/°C |
| Temperature Effect on Sensitivity |
Typical: ±0.02FS/°C
Maximum: ±0.05%FS/°C |
| ADC Response Time |
≤1ms |
| Insulation Resistance |
>100mΩ 500 VDC |
| Electromagnetism Compatibility |
EN61326-1:2013
EN61326-2-2:2013
The EMC Directive 2014/30/EU |
Housing
|
| Housing Material |
Stainless Steel 304, Cu, Al |
| Sealing Material |
FKM
For EPDM and other sealing types, see Customisation |
| Wetted Material |
Stainless Steel 316L |
Wiring
|
| Wiring Connector |
Water sealed quick-disconnect.
Mating connector and wire harness included. |
| Wiring |
Red for +8-30V Supply Voltage
Black for 4-20mA Output
Yellow Not Connected |
Logger inaccuracy not included in these specifications.