UK Supplier of Data Acquisition & Thermal Imaging systems, software and services

Search

µCAN.4.sg-BOX

4-channel strain gauge measurement CANopen module, with 24-bit resolution.

SKU 12.48.003 Category
Manufacturer:

£500.00 ex VAT

Available on back-order

Description

4-Ch Strain CANopen Module.

The decentralized data acquisition unit μCAN.4.sg-BOX is configured for the acquisition of data of four strain gauges or other types of resistance bridges. The data is acquired at a total sampling rate of 400 Hz.
Sensor signals are evaluated and linearized in a robust aluminium die-cast housing. The data is sent to the central evaluation point via CAN-bus.

Product Features

  • Acquisition of forces, torques, sequences and voltages
  • Internal power supply of strain gauge bridge
  • Protocol: CANopen CiA 404
  • Aluminium die-cast housing in protection class IP66, suitable for harsh industrial environments
  • 2 bi-colour LEDs for system status and error indication
  • Implementation of customer-specific protocols possible
I/O per Module 4
Power Supply Voltage 9 - 36VDC, polarity protected
Power Consumption 2W (84mA @ 24VDC)
Electrical Isolation fieldbus/control voltage 500Veff
Operating Temperature -40°C to +85°C (others available on request)
Transfer Rate 20KBit/sec to 1MBit/sec
Protocol CANopen CiA 301 and CiA 404 / CAN 2.0A and 2.0B / Others on request
Number of PDOs (CANopen) 2 transmit PDOs
Configuration Input sensor type via fieldbus
Baud rate and module address via DIP switches
Status Display 2 bi-colour LEDs for module status information
Protection Class IP66
Housing Die-cast aluminium housing 125 x 80 x 57 mm (L x W x H)
EMC Complies with EN 50082
Resolution / Conversion Time 24-bit / 10ms
Signal Type / Input Error
@23°C ambient temp
Strain gauge full bridge, four-conductor
0-100mV  3.3mV/V  2.0mV/V
0.1% v.E.
µCAN.4.sg-BOX - Specifications µCAN.4.sg-BOX - Specifications

µCAN.4.sg-BOX - User Manual µCAN.4.sg-BOX - User Manual

Request further information on this product below