4-channel strain gauge measurement with CAN interface.
£893.00 ex VAT
Available on back-order
4-Ch Strain Gauge F1 CAN Module.
The μCAN.4.sg-F1 is the versatile universal measuring module for analogue standard signals. The module is equipped to measure strain gauge full bridge signals using 4-wire technology at an adjustable sample rate of up to 1 kHz per input. The bridge is excited directly from the module with a ratio-metric measurement.
Signals are linearised and evaluated within the robust aluminium die-cast casing. Data is sent over the CANbus interface to a central processing unit or PC. Freely expandable and can be stacked. Due to the rugged IP65-rated casing, the modules are ideally suitable for temporary as well as mobile applications.
Foot / connecting element for F1 modules
F1/F1 connector (CAN + Power)
length 140mm, with Lemo connector at both ends
F1 terminal resistor
for CANbus with Lemo connector
F1 connection cable (CAN + Power)
length 2m, with Lemo / SUB-D connector 9-pin, open end for Power
F1 connection cable (CAN + Power)
length 2m, Lemo connector / open end
Sensor connector, Lemo K series
FGG.0K.306.CLAC50, 6-pin, solder contacts, water-tight
Power+CAN connector, Lemo F series
FGN.0F.305.XLC, 5-pin, solder contacts, water-tight
| I/O per Module | 4 |
| Power Supply Voltage | 9 - 36VDC, reverse polarity protected |
| Power Consumption | 2W (84mA @ 24VDC) |
| Isolation | Channels/Supply: 500Veff, Fieldbus/Supply: 500Veff |
| Operating Temperature | -40°C to +85°C |
| Transfer Rate | 50KBit/sec to 1MBit/sec |
| Protocol | RawCAN / CAN 2.0A and 2.0B |
| Configuration | free software configuration tool |
| Status Display | 2 bi-colour LEDs for module status indication |
| Protection Class | IP65 |
| Housing | Aluminium, powder-coated 120 x 110 x 48 mm (L x W x D) |
| EMC | Complies with EN 50082 |
| Signal Type / Accuracy @23°C ambient temp |
strain gauge full bridge, Ri > 350Ohm, 0.01% fsd., sensor excitation 4.096V |
| Sample Rate (Hz) | 2 to 3750 |
| Resolution | 2 Hz / 24-bit 3 Hz / 18-bit |
| Filter | Software filter / moving averaging, adjustable |
| Configuration Analogue Inputs | SYNC driven sending ADC-Interrupt driven sending Timer driven sending |
DAQLOG Systems Ltd
Brixham Laboratory
Freshwater Quarry, Brixham, TQ5 8BA
Tel: 01803 611 854
