µCAN.8.pwm-BOX 8 Channel Pulse Width CANopen Module

Description

8-Ch PWM output CANopen Module.

The μCAN.8.pwm-BOX component at its 8 outputs provides pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.).
The outlets are overload and short circuit protected. The μCAN.8.pwm-BOX is connected with the central control unit via the CAN-interface.

Product Features

8 PWM outputs
Each output to be charged with max. 1.4 A
Basic frequency 40 Hz to 5 kHz
Mark-to-space ratio 0.0 % to 100.0 %
Galvanically isolated fieldbus
3-wire connector terminal
Output drivers supplied separately
Status indication at each output
Protected against mechanical impact
Fieldbus CAN
Protocol CANopen / Raw CAN

I/O per Module	8 PWM
Power Supply Voltage	8 - 60VDC, polarity protected
Power Consumption	1.5W (60mA @ 24VDC) no-load operation
Potential Isolation	Fieldbus/control voltage 500Veff
Operating Temperature	-40°C to +85°C (others available on request)
Transfer Rate	10KBit/sec to 1MBit/sec
Protocol	CANopen CiA 401
Number of PDOs (CANopen)	2 receive PDOs
Configuration	In-/output mode via fieldbus Bit rate and module address via DIP-switches
Status Display	2 bi-colour LEDs for module status information 8 bi-colour LEDs for in-/outputs
Protection Class	IP66
Housing	die cast aluminium 125 x 80 x 57 mm (L x W x H)
EMC	Complies with EN 50082
Base Frequency	25Hz - 5KHz
Duty Cycle	0.0% to 100.0%
Resolution	0.5%
Outputs	no galvanic isolation of outputs, long-term short-circuit-protection, max. output current per output 1.4 A (total current over all outputs up to. 6A), overload and short-circuit detection / 5 to 50V DC