UK Supplier of Data Acquisition & Thermal Imaging systems, software and services



8-channel thermal data acquisition CANopen module for thermocouples or Pt100.

SKU µCAN.8.ti-SNAP Category

£331.00£353.00 ex VAT


8-Ch Temperature CANopen SNAP Module.

The decentralized data acquisition unit μCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors.
Due to its lean and compact structure our μCAN unit is ideally suited for DIN-rail mounting in a control cabinet.
Plug-in screw terminals facilitate quick integration of the μCAN.8.ti-SNAP into your systems.

Product Features

  • acquisition of thermal data with 16-bit resolution
  • Pt100 or J, K, L, R and T type thermocouples
  • wire break and short circuit detection
  • DIN-rail fastening TS35
  • protocol: CANopen CiA 301 and CiA 404
  • extended ambient temperature range -40°C to +85°
I/O per Module 8
Power Supply Voltage 9 to 36VDC, reverse polarity protected
Power Consumption Up to 1W (42mA @ 24VDC)
Potential Isolation --- (optional fieldbus/control voltage: 500Veff )
Operating Temperature -40°C to +85°C (others available on request)
Transfer Rate 50KBit/sec to 1MBit/sec
Protocol CANopen CiA 301 and CiA 404 (CAN 2.0A and 2.0B)
Number of PDOs (CANopen) 4 transmit PDOs
Configuration Sensor type via fieldbus
Bit rate and module address via DIP-switches
Status Display 1 bi-colour LED indicator for module status information
Protection Class IP20
Housing DIN-rail housing 22.5 x 128.8 x 102 mm (L x W x H)
EMC Complies with EN 50082
Vibration Resistance ---
Shock Resistance ---
Resolution / Conversion Time 16-bit / 20ms
Signal Type / Input Error
@23°C ambient temp
J, K, L, R and T type thermal signals with cold junction compensation
-200 °C to +1,200 °C, resolution 0.1K, accuracy +/- 0.5 K
-100 °C to +850 °C, resolution 0.1 K, accuracy +/- 0.5 K
other signal types upon request
µCAN.8.ti-SNAP Specifications µCAN.8.ti-SNAP Specifications

µCAN.8.ti-SNAP User Manual µCAN.8.ti-SNAP User Manual

Request further information on this product below