µCAN.8.pwm-SNAP 8 Channel PWM CANopen module

Description

8-Ch PWM SNAP output CANopen module.

The μCAN.8.pwm-SNAP component at its 8 outputs provides pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.).
The outlets are overload and short circuit protected. The μCAN.8.pwm-SNAP is connected with the central control unit via the CAN-bus.

Product Features

8 PWM outputs
max. load per output up to 1.4 A
protocol: CANopen CiA 401
LED for system status and error indication
3-wire connections
output voltage from 5 to 50 V

I/O per Module	8 PWM
Power Supply Voltage	8 to 60 V DC, reverse polarity protection
Power Consumption	1.5W (60mA @ 24V DC) no load operation
Potential Isolation	fieldbus/control voltage.: 500Veff
Operating Temperature	-40°C to +85°C
Transfer Rate	10KBit/sec to 1MBit/sec
Protocol	CANopen CiA 401 (CAN 2.0A and 2.0B)
Number of PDOs (CANopen)	1 transmit PDO / 2 receive PDOs
Configuration	In / output mode via field bus Bit rate and module address via DIP-switches
Status Display	1 bi-colour LED flashing indicator for module status information
Protection Class	IP20
Housing	DIN-rail housing 22.5 x 114.5 x 99 mm (L x W x H)
EMC	Complies with EN 50082
Outputs	No galvanic isolation of outputs, long-term short-circuit protection, max. output current per output 1.4 A (total current over all outputs up to 6A) Overload and short-circuit detection / 5 to50V DC
Frequency	25 Hz to 5 kHz
Duty Cycle	0.0% to 100.0%
Resolution	0.5%