µCAN.8.dio-SNAP 8 Channel Digital IO CANopen module

Description

8-Ch Digital CANopen SNAP Module.

The μCAN.8.dio-SNAP is designed for universal digital signal processing. The 8 connectors can be programmed as any combination of inputs or outputs.
The μCAN.8.dio-SNAP can be connected to the central control unit via the CAN bus.

Product Features

Multi protocol: CANopen, CANopen FD & J1939
DIN top hat rail casing, protection class IP20
Free configuration of its 8 channels as input or output
Digital inputs: 2-core connection for sensor supply
Digital outputs: short-circuit-proof, to be loaded with up to 1 A
Output drivers can be supplied separately
Indication of device state and errors by LEDs

I/O per Module	8
Power Supply Voltage	9 to 36 V DC, reverse polarity protected / drivers
Power Consumption	0.7W (30mA @ 24V DC) without load
Potential Isolation	Optional field bus / control voltage: 500Veff
Operating Temperature	-40°C to +85°C
Transfer Rate CAN Classic	50kBit/sec to 1MBit/sec
Transfer Rate CAN FD	1 MBit/sec to 4 MBit/sec
Protocol	CANopen CiA 301 (CANopen) or CANopen CiA 1301 (CANopen FD) or J1939
Number of PDOs	4 transmit PDO / 4 receive PDO
Configuration	Configuration of the terminals as input or output via field bus Bit rate and module address via DIP-switches
Status Display	2 bi-colour LEDs for module status information 8 bi-colour LEDs for input/output status information
Protection Class	IP20
Housing	DIN-rail housing 22.5 x 128.8 x 102.0 mm (L x W x H)
EMC	Complies with EN 50082
Outputs	Not galvanically isolated from each other, long-term short circuit proof, maximum output current per output 1.4 A Detection of short circuit and overload / 9 to 36V DC
Inputs	Not galvanically isolated from each other Switching threshold freely configurable