4-channel analog acquisition for current or voltage with CAN interface.
£893.00 ex VAT
4-Ch AI F1 CAN Module.
The µCAN.4.ai-F1 is the universal measurement module for analogue data acquisition. The module is designed for acquisition of standard voltage signals of +/-40V DC or current signals of -20 to 20mA at an overall sample rate of 4 kHz. Freely expandable and can be stacked. Due to the rugged IP65-rated casing, the modules are ideally suitable for temporary as well as mobile applications.
Foot / connecting element for F1 modules
F1/F1 connector (CAN + Power)
length 140mm, with Lemo connector at both ends
F1 terminal resistor
for CANbus with Lemo connector
F1 connection cable (CAN + Power)
length 2m, with Lemo / SUB-D connector 9-pin, open end for Power
F1 connection cable (CAN + Power)
length 2m, Lemo connector / open end
Sensor connector, Lemo K series
FGG.0K.306.CLAC50, 6-pin, solder contacts, water-tight
Power+CAN connector, Lemo F series
FGN.0F.305.XLC, 5-pin, solder contacts, water-tight
| I/O per Module | 4 |
| Power Supply Voltage | 9 to 36VDC, reverse polarity protected |
| Power Consumption | 2W (84mA @ 24VDC) |
| Isolation | Channels/Supply: 500Veff, Fieldbus/Supply: 500Veff |
| Operating Temperature | -40°C to +85°C |
| Transfer Rate | 20KBit/sec to 1MBit/sec |
| Protocol | RawCAN / CAN 2.0A and 2.0B |
| Configuration | free software configuration tool |
| Status Display | 1 bi-colour LED |
| Protection Class | IP65 |
| Housing | Aluminium, powder-coated 120 x 110 x 48 mm (L x W x D) |
| EMC | Complies with EN 50082 |
| Signal Type / Accuracy @23°C ambient temp |
+/-40V DC accuracy 0.01% fsd., input impedance 220 kOhm -20 to 20mA accuracy 0.01% fsd., input impedance 50 kOhm |
| Sample Rate (Hz) | 2 to 3750 |
| Resolution | 2Hz / 24-Bit ( output value ΔU = 0.00001 V = 10 μV ) 3kHz / 18-Bit ( output value ΔU = 0.001 V = 1 mV) |
| Filter | Software filter / moving averaging, adjustable |
| Configuration Analogue Inputs | SYNC driven sending ADC-Interrupt driven sending Timer driven sending |
DAQLOG Systems Ltd
Brixham Laboratory
Freshwater Quarry, Brixham, TQ5 8BA
Tel: 01803 611 854
