UK Supplier of Data Acquisition & Thermal Imaging systems, software and services



1-channel thermal data acquisition CANopen module for thermocouple and Pt100 / Pt1000.

SKU µCAN.1.ti-SNAP Category

£200.00£212.00 ex VAT


1-Ch Temperature CANopen SNAP Module.

The decentralized data acquisition unit μCAN.1.ti-SNAP is configured to acquire temperature signals.
Due to its lean and compact structure our μCAN unit is ideally suited for DIN-rail mounting in a control cabinet.
Plug-in screw terminals facilitate quick integration of the μCAN.1.ti-SNAP into your systems.

Product Features

  • Acquisition of thermal data with 16-bit resolution
  • Pt100 as well as J, K and L type thermo signals
  • Wire break and short circuit detection
  • DIN-rail fastening TS35
  • Standard protocol: CANopen CiA 404
  • Extended ambient temperature range of -40°C to +85°C
  • Relay output for alarm values
I/O per Module 1
Power Supply Voltage 12 - 36VDC, reverse polarity protected
Power Consumption 1W (42mA @ 24VDC)
Potential Isolation --- (optional fieldbus/control voltage.: 500Veff )
Operating Temperature -40°C to +85°C (others available on request)
Transfer Rate 10KBit/sec to 1MBit/sec
Protocol CANopen CiA 404 (CAN 2.0A and 2.0B)
Number of PDOs (CANopen) 2 transmit PDOs
Configuration Sensor type via fieldbus
Bit rate and module address via DIP-switches
Status Display 1 bi-colour LED flashing indicator for module status information
Protection Class IP20
Housing DIN-rail housing 22.5 x 114.5 x 99 mm (L x W x H)
EMC Complies with EN 50082
Vibration Resistance ---
Shock Resistance ---
Resolution / Conversion Time 16-bit / 20ms
Signal Type / Input Error
@23°C ambient temp
J, K, L type thermo signals with cold junction compensation
-200°C to +1200°C, resolution 0.1K, accuracy +/- 0.1K
-100°C to +850°C, resolution 0.1K, accuracy +/- 0.1K
other signal types upon request
µCAN.1.ti-SNAP Specifications µCAN.1.ti-SNAP Specifications

Request further information on this product below