µCAN.1.sg-TRS 1 Channel Analogue CANopen module

Description

1-Channel CANopen Transmitter for strain gauges. A universal data acquisition module for standard analogue strain gauge signals. The module is designed for strain gauge full bridge signals.
The bridge is powered via the transmitter which can be incorporated into your measuring lines. The analogue signal is sent via short connection lines to the μCAN.1.sg-TRS where the data is digitalized and sent on via CAN-interface to a distributed logging station.

Product Features

Strain gauge full bridge
Voltage +/- 20 mV
Supply voltage 4.5 V
Accuracy 0.2% (FS)
Resolution 16-bit (1 µV)
Sampling rate 20 ms / 50 Hz
Supply of the strain gauge full bridge
adjustable scaling
Fieldbus CAN
Protocol CANopen / CAN RAW

I/O per Module	1
Power Supply Voltage	9 - 40VDC, polarity protected
Power Consumption	max. 1W (42mA @ 24VDC)
Electrical Isolation	---
Operating Temperature	-40°C to +85°C
Transfer Rate	20KBit/sec to 1MBit/sec
Protocol	CANopen CiA-404 / CAN 2.0A and 2.0B / others upon request
Number of PDO's	2 transmit PDOs
Configuration	Sensor type via field bus Bit rate and module address via LSS
Status Display	---
Protection Class	IP67
Housing	Stainless steel circular housing, 22 x 52 mm ( diam. x L )
EMC	Complies with EN 50082
Resolution / Sampling Rate	16-bit / 50Hz
Signal Type / Accuracy @23°C ambient temp	strain gauge full bridge signal, +/-20,000 steps at 3mV/V, accuracy +/- 0.2% fsd