UK Supplier of Data Acquisition & Thermal Imaging systems, software and services



1-channel CANopen sensor acquisition for standard analog signals.

SKU µ Category

Call for price


1-channel CANopen sensor. The sensor module µ is designed to acquire an analogue signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances are adjusted. The sensor signal is linearized and monitored directly in the hardware.

Product Features

  • Voltage +/- 10 V
  • Current 0(4) to 20 mA
  • Accuracy 0.01% (FS)
  • Resolution 16-bit (1 mV / 1 µA)
  • Sampling rate up to 200Hz
  • Scaling adjustable
  • Sampling rate adjustable
  • Measurement range adjustable
  • Operating temperatures -40 to +85 °C
  • Supply voltage 9 to 36 V DC
  • Fieldbus CAN
  • Protocol CANopen / Raw CAN
I/O per Module 1
Power Supply Voltage 8 - 40VDC, reverse polarity protected
Power Consumption max. 500mW
Operating Temperature -40°C to +85°C
Transfer Rate 50KBit/sec to 1MBit/sec
Protocol CANopen CiA-404 / CAN 2.0A and 2.0B / others upon request
Number of PDO's 2 transmit PDOs
Configuration Bit rate and module address via LSS (with auto bitrate detection)
Status Display 1 LED for status information
EMC Complies with EN 50082
Resolutions / Sampling Rate 16-bit / 20ms
Signal Type / Accuracy
@23°C ambient temp
+/-10V DC accuracy 0.01% fsd, input impedance 500 kOhm
0(4)..20mA accuracy 0.01% fsd, input impedance 50 Ohm
Bus Connection Designed for M12 plug-in 5-pin circular connectors (equipped with solder pads, integration of any other connector type possible)
Type 18 x 30 mm
µ Specifications µ Specifications

µ User Manual µ User Manual

Request further information on this product below