UK Supplier of Data Acquisition & Thermal Imaging systems, software and services

Search

µCAN.8.pwm-SNAP

8-channel pulse width modulation output CANopen module.

SKU µCAN.8.pwm-SNAP Category
Manufacturer:

£408.00£419.00 ex VAT

Description

8-Ch PWM SNAP output CANopen module.

The μCAN.8.pwm-SNAP component at its 8 outputs provides pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.).
The outlets are overload and short circuit protected. The μCAN.8.pwm-SNAP is connected with the central control unit via the CAN-bus.

Product Features

  • 8 PWM outputs
  • max. load per output up to 1.4 A
  • protocol: CANopen CiA 401
  • LED for system status and error indication
  • 3-wire connections
  • output voltage from 5 to 50 V
I/O per Module 8 PWM
Power Supply Voltage 8 to 60 V DC, reverse polarity protection
Power Consumption 1.5W (60mA @ 24V DC) no load operation
Potential Isolation fieldbus/control voltage.: 500Veff
Operating Temperature -40°C to +85°C
Transfer Rate 10KBit/sec to 1MBit/sec
Protocol CANopen CiA 401 (CAN 2.0A and 2.0B)
Number of PDOs (CANopen) 1 transmit PDO / 2 receive PDOs
Configuration In / output mode via field bus
Bit rate and module address via DIP-switches
Status Display 1 bi-colour LED flashing indicator for module status information
Protection Class IP20
Housing DIN-rail housing 22.5 x 114.5 x 99 mm (L x W x H)
EMC Complies with EN 50082
Outputs No galvanic isolation of outputs, long-term short-circuit protection, max. output current per output 1.4 A (total current over all outputs up to 6A)
Overload and short-circuit detection / 5 to50V DC
Frequency 25 Hz to 5 kHz
Duty Cycle 0.0% to 100.0%
Resolution 0.5%
µCAN.8.pwm-SNAP Specifications µCAN.8.pwm-SNAP Specifications

Request further information on this product below