UK Supplier of Data Acquisition & Thermal Imaging systems, software and services

Search

µCAN.4.ci-SNAP

4-channel CANopen up/down counter module of up to 100 kHz.

SKU µCAN.4.ci-SNAP Category
Manufacturer:

£397.00£419.00 ex VAT

Description

4-Ch Counter CANopen SNAP Module.

The μCAN.4.ci-SNAP is equipped with 4 fast up/down counters of up to 500kHz. The CAN unit acquires binary impulses which are processed and sent on to an automation device via galvanically isolated wires. In addition, input signal frequencies may be set according to specific requirements.
Depending on the counter value the 4 outputs are switched and can be used as fast control signals. Outlets may be loaded up to 1.4 A and are short circuit protected.

Product Features

  • 4 up/down counters
  • Frequency measurement
  • 4 outputs for control signals
  • Outlets to be loaded up to 1.4 A
  • Protocol: CANopen CiA 404
  • LED for device status indication
  • Output voltage from 5 to 50 V
I/O per Module 4 fast counters, 4 I/O channels freely configurable
Power Supply Voltage 8 - 60VDC, reverse polarity protected
Power Consumption 1.5W (60mA @ 24V DC) no-load
Potential Isolation Field bus / control voltage: 500Veff
Operating Temperature -40°C to +85°C (others available on request)
Transfer Rate 50KBit/sec to 1MBit/sec
Protocol CANopen CiA 404 (CAN 2.0A and 2.0B)
Number of PDOs (CANopen) 2 transmit PDOs
Configuration Input / output mode via field bus
Bit rate and module address via DIP-switches
Status Display 1 bi-colour LED flashing indicator for module status information
Protection Class IP20
Housing DIN-rail housing 22.5 x 114.5 x 99 mm (L x W x H)
EMC Complies with EN 50082
Measurement Frequency 100KHz
Outputs No galvanic isolation of outputs, long-term short circuit protection, maximum output current per output 1.4 A (total current over all outputs up to 6A)
Short circuit and overload detection / 5 – 50V DC
Inputs No galvanic isolation of inputs
Input voltage range "high" dynamic at 55% of driver input voltage
max. input frequency 500kHz
µCAN.4.ci-SNAP Specifications µCAN.4.ci-SNAP Specifications

µCAN.4.ci-SNAP User Manual µCAN.4.ci-SNAP User Manual

Request further information on this product below