It is designed to operate either on serial interface RS-422 full-duplex 4 wires or RS485 half-duplex 2 wires, with a baud-rate transmission up to 115.2 Kbps. The transmission is asynchronous without settings of protocol, data format and baud rate.

The SS3580-USB is in compliance with the 89/336/EEC directive on the electromagnetic compatibility. The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.

Product Features

• Asynchronous serial data transmission
• Automatic baud-rate fitting up to 115.2 Kbps
• Distance up to 1200 m
• Point to point connection or multi-point connection up to 32 modules
• DC or AC power supply
• Galvanic isolation on all ways
• EMC compliance – CE mark
• Suitable for DIN rail mounting in compliance with EN-50022

For more information, please see the Product Specifications Sheet. 

The post SS3580-USB – Isolated Converter for USB to RS-485-RS-422 appeared first on DAQLOG Systems Ltd.

The device guarantees a full isolation between lines, allowing for use even in heavy environmental conditions. SS3000 series devices are designed to be easily mounted on DIN rail, optimizing the space encumbrance. Where the thermal dissipation allows it, the devices can be mounted side by side, reducing the amount of space required. The connections are made by means of removable screw terminals, to simplify the handling of the devices.

LED signalling of Ethernet activity and data rx-tx on the serial line allows  direct monitoring of the systems functionality. The connection is made by removable screw-terminals (supply and RS-485) and RJ45 plug (Ethernet).

SS3580-MBTCP is in compliance with the 89/336/EEC directive on the electromagnetic compatibility. The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.

Product Features

• Network interface
  • Ethernet 10/100Base-T, Modbus TCP
  • Telnet configuration
  • RJ45 connection
• RS-485 Serial interface
  • Modbus RTU Master
  • Baud rate up to 115.2 Kbps
  • Distance up to 1200 m, up to 32 devices in multi-point
  • Removable screw-terminal connection
• LED signalling for Link/Act Ethernet, serial RX-TX, power supply
• Galvanic Isolation on all ways
• EMC compliance – CE mark
• Suitable for DIN rail mounting in compliance with EN-50022

For more information, please see the Product Specifications Sheet.  

The post SS3580-MBTCP – Ethernet Converter for Modbus RTU RS-485 to Modbus TCP appeared first on DAQLOG Systems Ltd.

It is designed to operate either on serial interface RS-422 full-duplex 4 wires or RS-485 half-duplex 2 wires, with a baud-rate transmission up to 115.2 Kbps.
The transmission is asynchronous without settings of protocol, data format and baud rate.
On the line RS-232 are not necessary handshake commands (RTS, CTS, etc..) to control the baud rate.

SS3000 series devices are designed to be easily mounted on DIN rail, optimizing the space encumbrance. Whereas the thermal dissipation allows it, the devices can be mounted side by side, allowing a relevant reduction of space requiring. The connections are made by means of removable screw terminals, to simplify the handling of the devices.

The SS3580 is in compliance with the 89/336/EEC directive on the electromagnetic compatibility. The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 22.5 mm, allows a high density mounting on EN-50022 standard DIN rail.

Product Features

• Asynchronous serial data transmission
• Automatic baud-rate fitting up to 115.2 Kbps
• Distance up to 1200 m
• Point to point connection or multipoint connection up to 32 modules
• DC or AC power supply
• Galvanic isolation on all ways
• RS232 connection on DB9 or removable terminals
• EMC compliance – CE mark
• Suitable for DIN rail mounting in compliance with EN-50022

For more information, please see the Product Specifications Sheet.  

The post SS3580 – Isolated Converter for RS-232 to RS-485-RS-422 appeared first on DAQLOG Systems Ltd.

The SS3188 module is able to acquire up to 8 digital inputs and to drive up to 8 transistor outputs. The data are transmitted with MODBUS RTU/ASCII protocol on RS-485 network.

To assure safe operation of the system, the device is equipped with two Watch-Dog timers: in case of alarm, the outputs are forced automatically on the safe configuration; also, the outputs are protected against over currents and over temperature. The 2000 Vac galvanic isolation between inputs, outputs, power supply and RS-485 serial line cancels any ground-loop effect noise, allowing the use of the device in worst ambient conditions.

The SS3188 is in compliance to the 89/336/EEC directive on the electromagnetic compatibility. Furthermore, it is housed in a rough self-extinguishing plastic enclosure of 17.5 mm thickness, suitable for EN 50022 standard DIN rail.

The SS3188 is designed to work with the MODBUS RTU/ASCII protocol: standard protocol in field-bus; allows to directly interface SS3000 series devices to the larger part of PLCs and SCADA applications available on the market.

Product Features

• Field Bus data acquisition
• Master/Slave communication on RS-485 network
• MODBUS RTU/ASCII protocol or ASCII protocol
• 8 digital inputs
• 8 digital outputs, PNP type
• Over-temperature and over-current protection
• Watch-Dog alarm
• Four ways galvanic isolation 2000 Vac
• High accuracy
• EMC compliance – CE Mark
• In compliance to EN-50022 DIN rail mounting

For the protocol and installation instructions, please see the Product specifications sheet and user manual.  

The post SS3188 – 8ch DI 8ch PNP Output Modbus RS-485 IO Module appeared first on DAQLOG Systems Ltd.

The 2000 Vac galvanic isolation between inputs, power supply and RS-485 serial line cancels any ground-loop effect noise, allowing the use of the device in worst ambient conditions.

The SS3148 is in compliance to the 89/336/EEC directive on the electromagnetic compatibility. The SS3148 is housed in a rough self-extinguishing plastic enclosure of 17,5 mm thickness, suitable for EN 50022 standard DIN rail.

The SS3148 is designed to work with the MODBUS RTU/ASCII protocol: standard protocol in field-bus; allows to directly interface SS3000 series devices to the larger part of PLCs and SCADA applications available on the market.

Product Features

• Field Bus data acquisition
• Master/Slave communication on RS-485 network
• MODBUS RTU/ASCII protocol or ASCII protocol
• 8 + 4 (optional) digital inputs
• Watch-Dog alarm
• Four ways galvanic isolation 2000 Vac
• High accuracy
• EMC compliance – CE Mark
• In compliance to EN-50022 DIN rail mounting

For the protocol and installation instructions, please see the Product Specifications Sheet and User Manual.  

The post SS3148 – 8+4ch DI Modbus RS-485 IO Module appeared first on DAQLOG Systems Ltd.

To assure safe operation of the system, the device is equipped with two Watch-Dog timers. In case of alarm, the outputs are forced automatically on the safe configuration. The 2000 Vac galvanic isolation between inputs, outputs, power supply and RS-485 serial line cancels any ground-loop effect noise. This allows you to use the device in worst ambient conditions.
The SS3130 is in compliance to the 89/336/EEC directive on the electromagnetic compatibility. Furthermore, it is housed in a rough self-extinguishing plastic enclosure of 22.5 mm thickness, suitable for EN 50022 standard DIN rail. It is able to acquire up to 4 analogue input signals, data values are transmitted with MODBUS RTU/ASCII protocol on the RS-485 network (RS232 interface is available.)

The SS3130 is designed to work with the MODBUS RTU/ASCII protocol: standard protocol in field-bus. This allows you to directly interface SS3000 series devices to most PLCs and SCADA applications available on the market.

Product Features

• Field Bus data acquisition
• Master/Slave communication on RS-485 network
• MODBUS RTU/ASCII protocol or ASCII protocol
• 4 digital inputs
• 4 relay outputs (2 SPDT + 2 SPST)
• Watch-Dog alarm
• Four ways galvanic isolation 2000 Vac
• High accuracy
• EMC compliance – CE Mark
• In compliance to EN-50022 DIN rail mounting

For the protocol and installation instructions, please see the product specifications sheet and user manual.  

The post SS3130 – 4ch DIO-Relay Modbus RS-485 IO Module appeared first on DAQLOG Systems Ltd.