UK Supplier of Data Acquisition & Thermal Imaging systems, software and services

Search

SS10014 – 4ch RTD Modbus RTU-ASCII RS-485 IO Module

The SS10014 RTD IO Module is able to acquire up to 4 RTD input signals, data values are transmitted with MODBUS RTU/ASCII protocol on the RS-485 network.

SKU SS10014 Category
Manufacturer:

Call for price

Description

4ch RTD Modbus RTU-ASCII RS-485 IO Module, SS10014 from Sielco Sistemi.

The SS10014 RTD IO Module allows you to acquire up to 4 RTD input signals. These data values are transmitted with MODBUS RTU/ASCII protocol on the RS-485 network.

You can connect RTD , Potentiometers or Resistance signals. This device has many benefits. Firstly, the SS10014 guarantees you a high accuracy and stable measurement versus time and temperature. Two Watch-Dog timer alarms are also provided to ensure the plant safety. Additionally, the 1500 Vac isolation between input, power supply and serial line removes eventual ground-loop effects. This allows you to use the device in heavy environmental conditions. In addition, the device is housed in a 6 module DIN rough self-extinguishing plastic box allowing you to  mount on EN-50022 standard DIN rail.

The SS10014 is designed to work with the MODBUS RTU/ASCII protocol, a standard protocol in field-bus. This allows you to directly interface SS10000 series devices to many of  the PLCs and SCADA applications available on the market.

Product Features

  • Modbus Slave device on RS-485
  • Modbus RTU/ Modbus ASCII protocol
  • 4 input channels
  • Input configurable for RTD, Resistance and Potentiometer
  • Communication parameters configurable by dip-switches
  • Watch-Dog Alarm
  • Remotely Configurable
  • 1500 Vac 3-ways Galvanic Isolation
  • LED signalling on front side for power supply and communication
  • Connection by removable screw terminals
  • High Accuracy
  • CE mark
  • DIN rail mounting in compliance with EN-50022

For the protocol and installation instructions, please see the Product specifications sheet and user manual. 

Typical @ 25°C and in the nominal conditions

RTD Input 2 or 3 wires Pt100: -200 to +850 °C 
Pt1000: -200 to + 200 °C
Ni100: -60 to +180 °C
Ni1000: -60 to +150 °C
RES. Input 2 or 3 wires Low: 0 to 500 Ω
High: 0 to 2000 Ω
POT. (nom value) Low: 20 to 500 Ω
High: 20 to 2000 Ω
Input Calibration RTD: ±0.05 % f.s.
Res.: ±0.05 % f.s.
Pot.: ±0.05 % f.s.
Linearity RTD ±0.1 %
Lead wire resistance influence RTD/res. 3 wires: 0.05 %/Ω (50 Ω max balanced) f.s.
RTD excitation current 0.350 mA
Thermal Drift ± 0.01 % / °C f.s.
Rise Time 0.5 to 1 sec
Data Transmission Baud Rate: 115.2 Kbps
Max Distance: 1.2 Km – 4000 ft
Warm-up Time 3 min.
Power Supply Voltage 10 to 30 Vdc
Power Supply Current Consumption 30 mA max @ 24 Vdc
45 mA max @ 10 Vdc
Power Supply Polarity Inversion Protection 60 Vdc max
Isolation Input - RS485: 1500 Vac 50 Hz, 1 Min.
Supply - Input: 1500 Vac 50 Hz, 1 Min.
Supply - RS485: 1500 Vac 50 Hz, 1 Min.
Operating Temperature -10 to +60 °C
Storage Temperature -40 to +85 °C
Humidity (non condensing) 0 to 90 %
Maximum Altitude 2000 m
Housing Material Self-extinguishing plastic
IP Code IP20
Wiring Wires with diameter 0.8 to 2.1 mm² (AWG 14-18)
Tightening Torque 0.5 N m
Mounting EN-50022 DIN rail
Weight ∼ 200 g
EMC EN 61000-6-2
EN 61000-6-4

 

IOlog SS10014 Specifications IOlog SS10014 Specifications

IOlog SS10014 User Guide IOlog SS10014 User Guide

Request further information on this product below