DI-4108-M Programmable ranges: ±200, ±500 mV, ±1, ±2, ±5, ±10 V full scale
DI-4208-M Programmable ranges: ±2, ±5, ±10, ±20, ±50, ±100 V full scale

Product Features

• 8 Analogue Input Channels
  Measure as many as eight system variables at once with programmable ranges per channel 

• Differential Analogue Input Configuration
  Enhanced noise immunity and tolerance of common mode voltages.

• 12- to 16-bit Measurement Resolution

• Armored Inputs Absorb Mistakes
  Both Analogue and digital inputs are protected

• Fast 160 kHz Sample Throughput Rate *2

• Stand-alone Data Logger Operation 
  Store data to flash drives at throughput rates up to 160kHz (requires AC power supply)
  (Note: only with Stand-alone / SA Enabled Option)

• 15V Excitation
  DI-4108M provides 15V excitation to power sensors.

• Pre/Post Tigger Storage to USB Memory
  Set trigger levels to record up to 2G (combined) of pre- and post-trigger data (total file size of 4G)

• Auto Re-Trigger
  When using Triggered Storage, triggers can automatically reset, creating a new file with pre and post-trigger data each time the trigger level is breached.

• Industrial Oriented
  DI-4108M comes with easy signal swapping connectors, stackable rugged enclosure and ground lug to provide better EMC immunity in harsh environment.

• Supports ChannelStretch Channel Expansion *3
  Connect as many as sixteen DI-4108s , DI-4208s, DI-4718Bs, and/ or DI-4730s to one PC. Synchronously acquire from as many as 128 and 112 Analogue and digital channels respectively.

• Seven Digital Input Ports
  Folds discrete I/O into the measurement process. Each bit is programmable as an input or as a switch and protected to 0-25 V dc.

• Asynchronous Digital Switches
  Control external processes seamlessly while acquiring data.

• Counter Channel
  Tallies the number of pulses applied. Useful for integrating rate information, like flow rate to volume, or simply the number of definable events.

• Rate Measurement Channel
  Measures pulse rate where frequency carries information. For example: rpm or flow measurements.

• Optional Power over Ethernet (PoE)
  The optional Power over Ethernet feature allows you to both communicate with and power the DI-4108 via the Ethernet connector, sparing the inconvenience and expense of running power to the unit.

• Ready-to-run Software Support
  Provided with ready-to-run WinDaq software for point-and-click DAQ performance with a real-time display, disk-streaming recording, and playback and analysis.

*1 160,000 S/s in USB mode; 100,000 S/s in Ethernet mode.

*2 160 kHz stand-alone dependent on storage card type – refer to the Specifications Sheet

*3 WinDaq/Unlock required per device to use ChannelStretch and to record more than four total channels when using WinDaq software.

Need trigger modes or to stream to Excel directly? Please consider ExcelLink

The post DI-4108-M and DI-4208-M Rugged High-Speed USB/Ethernet Data Loggers appeared first on DAQLOG Systems Ltd.

DI-4108-E Programmable ranges: ±200, ±500 mV, ±1, ±2, ±5, ±10 V full scale
DI-4208-E Programmable ranges: ±2, ±5, ±10, ±20, ±50, ±100 V full scale

Product Features

• 8 Analogue Input Channels
• Differential Analogue Input Configuration
  Enhanced noise immunity and tolerance of common mode voltages.
• 12- to 16-bit Measurement Resolution
• Armoured Inputs Absorb Mistakes
  Both analogue and digital inputs are protected to 120 Vrms and 0-25 V dc respectively.
• Fast 160 kHz Sample Throughput Rate *2
• Stand-alone Data Logger Operation (only with Stand-alone / SA Enabled Option)
  Store data to flash drives at throughput rates up to 160kHz. *2
• Pre/Post Tigger Storage to USB Memory
  Set trigger levels to record up to 2G (combined) of pre- and post-trigger data (total file size of 4G)
• Auto Re-Trigger
  When using Triggered Storage, triggers can automatically reset, creating a new file with pre and post trigger data each time the trigger level is breached.
• Supports ChannelStretch Channel Expansion *3
  Connect as many as sixteen DI-4108s , DI-4208s, DI-4718Bs, and/or DI-1120s to one PC. Synchronously acquire from as many as 128 and 112 analogue and digital channels respectively.
• Seven Digital Input Ports
  Folds discrete I/O into the measurements process. Each bit is programmable as an input or as a switch and protected to 0-25 V dc.
• Asynchronous Digital Switches
  Control external processes seamlessly while acquiring data.
• Counter Channel
  Tallies the number of pulses applied. Useful for integrating rate information, like flow rate to volume, or simply the number of definable events.
• Rate Measurement Channel
  Measures pulse rate where frequency carries information. For example rpm or flow measurements.
• Ready-to-run Software Support
  Provided with ready-to-run WinDaq software for point-and-click DAQ performance with a real-time display, disk-streaming recording, and playback and analysis.

*1 160,000 s/s in USB mode; 100,000 s/s in Ethernet mode.

*2 160 kHz stand-alone dependent on storage card type – refer to the Specifications Sheet

*3 WinDaq/Unlock required per device to use ChannelStretch and to record more than four total channels when using WinDaq software.

Need trigger modes or to stream to Excel directly? Please consider ExcelLink

Need rugged industrial configuration? Please consider DI-4108-M

The post DI-4108-E and DI-4208-E High-Speed USB and Ethernet Data Loggers appeared first on DAQLOG Systems Ltd.

Product Features

• 8 Analogue Input Channels
  Measure as many as eight system variables at once with programmable ranges per channel of ±10mV, ±100mV, ±1V, ±10V, ±100V, ±1000V full scale with channel-to-channel and input-to-output isolation. Channel-to-channel isolation protects delicate control circuits, computer equipment, and personnel from high common mode voltages.
• 12- to 16-bit Measurement Resolution
• Fully Isolated Inputs
  Analogue inputs are protected to ±1000V input-to-output and channel-to-channel. Digital inputs are protected at 0-25 V dc.
• Fast 160 kHz Sample Throughput Rate *1
• Stand-alone Data Logger Operation (only with Stand-alone / SA Enabled Option)
• Store data to removable USB flash drives.
• Pre/Post Tigger Storage to USB Memory
  Set trigger levels to record up to 2G (combined) of pre- and post-trigger data (total file size of 4G)
• Auto Re-Trigger
  When using Triggered Storage, triggers can automatically reset, creating a new file with pre and post trigger data each time the trigger level is breached.
• Comprehensive Published Protocol
  Program in any environment or operating system with our fully documented and comprehensive protocol document. Numerous programming examples are available to help programmers of any level get up and running as quickly as possible.
• Supports Channel Expansion *3
  Connect up to 16 DI-4108s , DI-4208s, DI-4718Bs, and/or DI-4730s to one PC. Synchronously acquire up to 128 analogue and 112 digital channels.
• 7 Digital Input Ports
• Counter Channel
• Rate Measurement Channel
• USB, Ethernet, and PoE Interfaces Included
• Ready-to-run Software Support
  Provided with ready-to-run WinDaq software for point-and-click DAQ performance with a real-time display, disk-streaming recording, and playback and analysis.

Supplied with: a 6-foot USB cable, a 5-foot Ethernet cable, a power supply and adapter, a screwdriver for digital input signal connections, and a USB thumb drive with WinDaq software.

*1 160,000 S/s in USB mode; 100,000 S/s in Ethernet mode.

*2 160 kHz stand-alone dependent on storage card type – refer to the Specifications Sheet

*3 WinDaq/Unlock required per device to use ChannelStretch and to record more than four total channels when using WinDaq software.

Need trigger modes or to stream to Excel directly? Please consider ExcelLink

The post DI-4730 High-Voltage High-Speed Data Logger appeared first on DAQLOG Systems Ltd.

Possible alternative to the following discontinued units: DI-715B, DI-500 Series, DI-510 Series, DI-740, DI-750 Series, DI-760 Series. 
Direct replacement for the soon to be discontinued DI-718B.

Product Features:

• Eight Signal-conditioned Input Channels
  Measure temperature, pressure, flow, current, voltage, and more using isolated DI-8B amplifiers.
• Stand-alone Data Logger Operation (only with Stand-alone / SA Enabled Option)
• Store data to flash drives at throughput rates up to 160kHz. *2
• Connect via LAN or over the Internet for configuration and data acquisition.
• Pre/Post Tigger Storage to USB Memory
  Set trigger levels to record up to 2G (combined) of pre- and post-trigger data (total file size of 4G).
• Fast, 160 kHz Sample Throughput Rate *1
• 12- to 16-bit ADC Resolution
• Auto Re-Trigger
  When using Triggered Storage, triggers can automatically reset, creating a new file with pre and post trigger data each time the trigger level is breached.
• Expandable with ChannelStretch *3
  Expand time-aligned channel count by adding as many as sixteen DI-4718Bs, DI-4108s, DI-4208s, and/or DI-1120s to one PC. Synchronously acquire from as many as 128 analogue and 112 digital channels.
• Two digital ports for remote controls
• Comprehensive Programming Support
  The DI-4718B includes a comprehensive .Net class for the Windows programming environment. A device protocol is fully documented for use with operating systems other than Windows.
• Optional Power over Ethernet (PoE)
  The optional Power over Ethernet feature allows you to both communicate with and power the DI-4718B via the Ethernet connector, sparing the inconvenience and expense of running power to the unit.
• Ready-to-run Software Support
  Provided with ready-to-run WinDaq software for point-and-click DAQ performance with a real-time display, disk-streaming recording, and playback and analysis.

*1 160,000 S/s in USB mode; 100,000 S/s in Ethernet mode.

*2 160 kHz stand-alone dependent on storage card type – refer to the Specifications Sheet

*3 WinDaq/Unlock required per device to use ChannelStretch and to record more than four total channels when using WinDaq software.

Need trigger modes or to stream to Excel directly? Please consider ExcelLink

DI-8B amplifiers – sold separately.

• AC/DC voltage (millivolt) 
• AC/DC voltage (volts) 
• AC/DC voltage with excitation
• Analogue Current
• 2-Wire Transmitter Interface
• Thermocouple
• RTD (2-,3-,4-wire)
• AC True RMS voltage
• Strain gauge-based sensor
• Frequency (RPM)
• Potentiometer (string pot)

Application Areas

The 8-channel USB & Ethernet Data Logger can be used in many applications such as:

• In-vehicle automotive testing.
• Remote wireless radio monitoring for signal strength, power supply voltages, etc.
• Agricultural equipment testing.
• Electromechanical timing and amplitude measurements on presses and mills (e.g. paper, steel, tube).

The post DI-4718B 8-channel USB or Ethernet Data Logger appeared first on DAQLOG Systems Ltd.