The SEFRAM97 is designed to identify and trace wires or cables within a group without damaging the insulation.

• Cable locator (cables de-energized)
• 2 tone generator
• Amplifier probe with filter
• Testing of analog telephone lines (polarity, line condition)
• Headphone output for noisy environments
• Simple and practical device
• 1 year warranty

The SEFRAM97 has been designed and tested according to CE safety requirements for electronic measuring apparatus, EN 61326-1 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-8 CIS PR11 and other safety standard.

The post Cable Tracer Filter Probe & Tone Generator appeared first on DAQLOG Systems Ltd.

The SEFRAM96 is a newly designed tool that can easily test the correct pin configuration of the RJ45/RJ11 modular cables, USB, COAX, BNC cable & Multi-wire cable.

By comparing one transmitting end and the corresponding receiving end, the SEFRAM96 can also test installed cables from a distance by using the receiving unit.
The tester provides the capability for wiring checking, such as cable continuity, open status, short status and miss-wired.

Designed for testing :

• RJ45/RJ11 -USB
• COAX -BNC cable
• Multi-wire cable

The tester can verify cable continuity, open, short circuit and miss-wired. The receiving unit is available for installed cables either on the wall plates or on the patch panels.

Key Features

• Auto-scan and manual-check function.
• Buzzer sound warning for wire status.
• 2 LED module indicators on the master unit
• 1 year warranty

The post All in One Multi-purpose Cable Tester and Cable Tracer appeared first on DAQLOG Systems Ltd.

Product Features

• Testing of RJ-45, RJ-11, BNC cables
• Tested network: 10 baseT, 100 baseT, token ring, BNC
• Continuity, short-cut, open circuit and wiring fault testing
• Deported test module for installed cables
• Automatic or manual sweep mode
• Simple and robust
• Supplied with carrying case
• 1 year warranty

The post Network cables tester (RJ-45, RJ-11) appeared first on DAQLOG Systems Ltd.

The SEFRAM87 operates from 75V AC to 1000V AC, thus covering the entire spectrum of industrial voltages.

Product Features

• Presence and phase order control
• Works without direct contact with the conductors to be tested, for optimum safety
• LED and buzzer indication
• Operates from 75VAC to 1000V AC
• Ease of use
• Protective cover
• Safety: CAT III – 1000V and CAT IV – 600V
• 1 year warranty

The post Non-contact safety phase rotation detector appeared first on DAQLOG Systems Ltd.

Key Features

• Indicates Phase Presence
• Indicates Phase Rotation
• Indicates Motor Rotation / Wiring
• Indicates Battery Status
• Indication works from as low as 1 Vac
• Small and rugged enclosure
• 1 year warranty

The post Phase rotation tester with LED appeared first on DAQLOG Systems Ltd.

Product Features

• Indicates Phase Presence
• Indicates Phase Rotation
• Holster
• 1 year warranty

The post Rotary Phase tester appeared first on DAQLOG Systems Ltd.