Product Features

• 5-digit digital display (reading scale -19999 to +99999)
• Static strain measurement
• Analogue voltage output supported.
• Hold Functions: Offers various hold modes including Peak, Bottom, Peak to Peak, and block-specified hold (Peak, Bottom, Peak to Peak).
• Data Output Options: Equipped with either BCD (Binary Coded Decimal) output or an RS-232C interface.
• Panel Mountable: Designed in a standard 1/4 DIN size for easy integration into manufacturing equipment panels.
• TEDS Compliant: Supports IEEE 1451.4 standards, enabling automatic setup and calibration when paired with a TEDS-enabled load cell, which eliminates the need for manual configuration.

Applications:

• Quality control
• Fabrication
• Advanced analysis
• General force measurement in industrial settings

The post TD-260T Digital Indicator appeared first on DAQLOG Systems Ltd.

Product Features

• High-speed processing 25000 times/sec
• 4.3-inch wide touchscreen monitor mounted on a panel with 92 x 92 mm hole size.
• Displacement input as standard
• Analogue Output  0 to +-10V, or 4 to 20 mA
• Digital Output either RS-232C or USB
• TEDS Calibration
• Linearization Calibration
• Built-in memory and SD card drive
• Judgement result display function
• Load cell diagnostic functions:
  Static strain display
  Disconnection detection

Displacement Sensor Input

The post TD-9000T High-speed Digital Indicator for Load Management appeared first on DAQLOG Systems Ltd.

The TD-SC1 is a strain gauge signal conditioner which converts a minute electrical signal of a load cell into an output that matches the specifications of the control unit.
This product is mainly used for pressurising force control of load cells for semiconductor manufacturing equipment, industrial robots, FA equipment, etc.
In recent years, the introduction of IoT in production factories has accelerated rapidly. Amid the demand for improved productivity through centralized management, the TD-SC1 series meets that need.

Product Features

• Thin, compact, light-weight design
  30 x 85 x 110mm (w x h x d), 210g
• Din rail mountable
• TEDs calibration
• Digital filter
  3, 10, 30, 100, 300, 1000 Hz(−6 dB/oct) or Off as standard
• High-speed A/D conversion
  high-speed sampling of 20,000 times/sec
• Status indicator
• Fieldbuses RS-485, CC-Link, EtherNet/IP , etc.

The post TD-SC1 Strain Gauge Signal Conditioner Series appeared first on DAQLOG Systems Ltd.

• High-performance colour graphic LCD screen
• DIN size body, compact and lightweight
• TEDS – plug and play
• 4000 times / second (20000 times / sec at hold) high-speed processing

Product Features

Display options

Switchable between the 5-digit digital display that enables direct reading of physical quantities up to ±99999 and the bar meter display that shows an analogue representation of the indicator value.

Positive and negative value sample hold

TD-700T can sample, hold and average both positive and negative values. It can be used in measurements using dual pole devices such as torque sensors.

Static strain display

Allows the measurement of static strain. This function makes it easier to check load-cells for deterioration and plastic deformation.  

Comparison function

It is possible to set up to 4 values (HHI, HI, LO and LLO) to compare with the input signal. The definition of those values is changeable (e.g. 3 upper limits and 1 lower limit). This provides users with a wide variety of applications, and would help avoid damages and/or problems on your products.

Analogue voltage / current output (isolated)

TD-700T can also be used as a signal conditioner.

CC-Link  and RS-485 Connection Options

The TD-700T optionally supports CC-Link and RS-485 interfaces

The post TD-700T High Speed Digital Load Cell Indicator appeared first on DAQLOG Systems Ltd.

Product Features

• 2.4″ colour TFT LCD
• TEDS 1451.4 compliant (TEDS compatible Load-cell is connected, the unit will automatically self calibrated)
• Waveform display, overdrawing previous data on current data to compare is available
• Data storing
• Static strain reading (10,000 μst max.)
• Cable breaking detection
• Sensitivity of Load-cell and display configuration can be stored in the unit. (up to 6 sets)
• Numeric (full 5 digits) and Waveform selectable
• Terminal Input for bare wire and 7P Tajimi connector for NDIS
• Real load calibration and Equivalent load calibration are available.
• Comparator function. Easy recognition by changing colour (Over / Lower)
• Holding and Triggering function (Auto / Normal / Single)
• Analogue output (works as a signal conditioner)
• Fast Sampling Rate 1,000 times / second 24bit A to D conversion
• Language English / Japanese selectable
• AA batteries x 4 (working 8 hours) or USB bus power (Not for charging)
• CE, RoHS, REACH

The post TD-01 Portable Load-Cell Indicator appeared first on DAQLOG Systems Ltd.

CA-20 is designed for quick and easy sensitivity check of accelerometers after they have been used under harsh conditions.

Product Features

• Compact and lightweight
• Battery-powered and can be used anywhere. It can also be used for a long time with the AC adapter power supply.
• Supports a wide range of drive power supplies for accelerometers with built-in amplifiers, and sensors from various manufacturers can now be used.
• Up to 100 data can be saved in the CA-20 main unit. Data can be transferred via USB. (Dedicated software)
• You can calibrate an ultra-compact accelerometer with low sensitivity.

The post CA-20 appeared first on DAQLOG Systems Ltd.