The decentralized data acquisition unit μCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors.
Due to its lean and compact structure our μCAN unit is ideally suited for DIN-rail mounting in a control cabinet.
Plug-in screw terminals facilitate quick integration of the μCAN.8.ti-SNAP into your systems.

Product Features

• acquisition of thermal data with 16-bit resolution (0.1°C)
• Pt100 or E, J, K, L, N, R and T type thermocouples
• Accuracy +/- 0.5 K (Thermo), +/- 0.2 K (Pt100)
• Sampling rate 20 ms / 50 Hz
• Galvanically isolated fieldbus (option)
• wire break and short circuit detection
• DIN-rail fastening TS35
• protocol: CAN / CANopen / Raw CAN
• extended ambient temperature range -40°C to +85°

The post µCAN.8.ti-SNAP appeared first on DAQLOG Systems Ltd.

The μCAN.8.pwm-SNAP component at its 8 outputs provides pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.).
The outlets are overload and short circuit protected. The μCAN.8.pwm-SNAP is connected with the central control unit via the CAN-bus.

Product Features

• 8 PWM outputs
• max. load per output up to 1.4 A
• protocol: CANopen CiA 401
• LED for system status and error indication
• 3-wire connections
• output voltage from 5 to 50 V

The post µCAN.8.pwm-SNAP appeared first on DAQLOG Systems Ltd.

Supporting CANopen, CANopen FD, and J1939 protocols, this module is ideal for industrial, automotive, and embedded applications. Its compact DIN rail housing and robust design ensure reliable performance in demanding environments, with an operating temperature range of -40°C to +85°C.

With features such as short-circuit protection, LED diagnostics, and optional galvanic isolation, the µCAN.8.dio-SNAP provides a scalable and cost-effective solution for distributed I/O systems.

Product Features

• 8 configurable digital I/O channels (input or output)
• Multi-protocol support: CANopen, CANopen FD, J1939
• DIN rail mounting (compact SNAP housing)
• Short-circuit protected outputs (up to ~1 A per channel)
• LED status indicators for diagnostics
• Optional galvanic isolation for CAN bus
• Configurable via fieldbus and DIP switches

The post µCAN.8.dio-SNAP appeared first on DAQLOG Systems Ltd.

The decentralized data acquisition unit μCAN.6.ai-SNAP is configured to acquire up to 6 analogue signals 0 to 20mA or ±10V.
Due to its lean and compact structure our μCAN unit is ideally suited for DIN-rail mounting in a control cabinet.
Plug-in screw terminals facilitate quick integration of the μCAN.6.ai-SNAP into your systems.

Product Features

• CANopen protocol CiA 404
• Acquisition of up to 6 analog signals 0(4) to 20mA
• Acquisition of up to 6 analog signals +/-10V
• 16-bit resolution / 50Hz sampling rate
• DIN rail fastening TS35
• Extended ambient temperature range -40°C to +85°C

The post µCAN.6.ai-SNAP appeared first on DAQLOG Systems Ltd.

The μCAN.4.ci-SNAP is equipped with 4 fast up/down counters of up to 500kHz. The CAN unit acquires binary impulses which are processed and sent on to an automation device via galvanically isolated wires. In addition, input signal frequencies may be set according to specific requirements.
Depending on the counter value the 4 outputs are switched and can be used as fast control signals. Outlets may be loaded up to 1.4 A and are short circuit protected.

Product Features

• 4 up/down counters
• Frequency measurement
• 4 outputs for control signals
• Outlets to be loaded up to 1.4 A
• Protocol: CANopen CiA 404
• LED for device status indication
• Output voltage from 5 to 50 V

The post µCAN.4.ci-SNAP appeared first on DAQLOG Systems Ltd.

The decentralized module µCAN.4.ao-SNAP features CANopen to four analogue outputs, which optionally provide a voltage output signal (±10V) or a current output signal (0-20mA). The digital process value is scaled to an analogue output signal in a DIN-rail casing which is 22.5 mm in width. The CAN interface supports CANopen and J1939 protocols.

Product Features

• Output of up to 4 analogue signals at a resolution of 16 bit for standard signals of ±10 V, 0-20 mA and 4-20 mA
• Standard protocol: CANopen CiA 404
• Implementation of customer specific protocols possible
• Indication of device state and errors by LED
• accuracy voltage output: 1mV
• accuracy current output: 1µA

The post µCAN.4.ao-SNAP appeared first on DAQLOG Systems Ltd.