Product Features

• 5-digit digital display (reading scale -19999 to +99999)
• Static strain measurement
• Analogue voltage output supported.
• Hold Functions: Offers various hold modes including Peak, Bottom, Peak to Peak, and block-specified hold (Peak, Bottom, Peak to Peak).
• Data Output Options: Equipped with either BCD (Binary Coded Decimal) output or an RS-232C interface.
• Panel Mountable: Designed in a standard 1/4 DIN size for easy integration into manufacturing equipment panels.
• TEDS Compliant: Supports IEEE 1451.4 standards, enabling automatic setup and calibration when paired with a TEDS-enabled load cell, which eliminates the need for manual configuration.

Applications:

• Quality control
• Fabrication
• Advanced analysis
• General force measurement in industrial settings

The post TD-260T Digital Indicator appeared first on DAQLOG Systems Ltd.

The WX-9000 High-Speed Wide-Band Data Recorder from TEAC – This new and enhanced data recorder builds on the performance of it’s predecessor, the WX-7000, with improved functionality and ease of use. 

New and improved features include…

High Sampling and Recording Rate

Supports 256kHz sampling (100kHz band) and 64ch (16bit) recording. Up to 128 channels can be recorded at 102.4 kHz (40 kHz band).

Wide Dynamic Range

Achieves high dynamic range of 137dBtyp based on FFT.

Stand Alone and GUI Enhancement

Recording, playback, settings, and operation in one unit. Easier to use with a waveform display on the main unit’s LCD screen and a touch panel. Operation with the jog dial and buttons is still possible as before.

Distributed I/O Deployment

The connection between the main unit and the extension, as well as between extensions (for standalone recording), can be extended up to a maximum of 50 meters with an optional cable connection. Sampling maybe subject to restrictions.

Channel-to-Channel Isolation

Isolating every 2 channels makes it less susceptible to noise and interference from other channels.

Channel Expansion

Number of channels can be increased by 16, up to a maximum of 128 without the need for cables. The main unit and expansion I/O units can be connected simply by stacking them together.

GPS Input

Built-in GPS input (GPS receiver is optional).
Time and location information can be acquired.

Automatic Recording on Power Up

Automatic recording and standby mode for recording can be set at power-on.
In the event of an unexpected power outage, it is also possible to enable automatic recording after power recovery.

Recording Media

The recording media is freely available and inexpensive 2.5-inch SATA SSD (up to 4TB), which also ensures vibration resistance.
A dedicated cartridge is used, and the cartridge can be used as is as removable media.
*The SD card cartridge can only be used in the WX-9000.

Improved Software Performance

Redesigned and easier to use, the Navi Software allows configuring the main unit, setting measurement conditions, displaying recorded data, etc. from a PC. Displays waveforms, bar meters and FFT.

The post WX-9000 Series appeared first on DAQLOG Systems Ltd.

TEAC XR Series VHS Cassette Recorders

XR-50, XR-310, XR-510, XR-710, XR-5000, XR-7000 and XR-9000

Do you have old media you wish to transfer to the latest format.
By using the latest TEAC WX-7000 series recorders and your old equipment, we are able to replay your old data into this latest recorder and save it to removeable hard disks. With the data saved in TEAC’s open Taffmat Data format.

Limitations may apply depending on bandwidth of recorded data on units fitted with DR recorder channels.

Please contact us for more information.

The post TEAC XR Series appeared first on DAQLOG Systems Ltd.

The post TEAC AC Power Supply Unit appeared first on DAQLOG Systems Ltd.

• Analogue Input: 4ch (DC / AC / ICP)
• Frequency: 40k / 20k / 10k / 5k / 2.5k / 1.25k / 630/100
• 16 bit / 24 bit resolution (20 kHz band, 1 V range, 24 bit mode)
• Dynamic Range: 100 dB
• Pulse input: 1 ch, GPS input, CAN input
• Video input: Gigabit Ethernet,
• Number of channels: 2 ch
• Frame Rate: 30fps x 2ch (VGA image quality: 480p)
• Recording Media: CFast VR View (Viewer Analysis Software)
• CFast 64 GB, SDHC (maximum 32 GB)

Supplied with manuals, software, 2 x standard cameras, 2 x 5m camera cables, CFast Reader, DC power cable and Soft Carrying Case.

For further information please visit the product page or view the specification sheet.

The post VR-24 Analogue Video Recorder appeared first on DAQLOG Systems Ltd.

Small and light weight.

TEDS compliant.

The post TU-QR(T)-G3 Tension – Compression Load Cell appeared first on DAQLOG Systems Ltd.